Grow Tent Setup Guide

Gorilla grow tents are easier to set up than any other grow tents available on the market. In fact, these tents come with easy-to-follow installation instructions to allow quick set up of the tent. Here is a complete guide for gorilla grow tent set up.

#1.Tent assembly

You will start this step by unpacking the gorilla grow tent from the box. The set up the frame of the tent and cover it with the skin of the tent. Also, place the roof of the gorilla grow tent over the top of your frame. Then wrap and zip the walls of your tent between the floor and the roof in order to cover the sides of the tent frame. However, you can leave the front part of your tent unzipped. This is to allow easier access into the grow tent.

#2. Light installation

This is the most crucial step in the gorilla grow tent set up. The lights will allow optimum growth of the plants in the grow tent. Assemble the cool tubes and attach the heat proof ducting to the ducting flanges of cool tubes. Use the hose clamps to fix he ducting to the cool tubes ducting flanges. Attach the chains to the mounting holes in the reflectors. Mount the loose ends of the chains to the support rails and allow the cool tubes to hang at the level height inside the gorilla grow tent.

#3. Fan installation

Fan ensure good circulation of air inside the grow tent. Connect the heat proof ducting to the external side of your fan and pass it through the appropriate hole in the wall of the tent. You can then use a chain to suspend the fan inside the gorilla grow tent.

#4. Ballast installation

The installation of the ballast is similar to that of the fan. Use chain to mount the ballast inside the gorilla grow tent. Run the power cables across the top of frame support of the tent. Then exit the cable through the appropriate holes in the tent.

#5. Irrigation system set up

This is a crucial section of the gorilla grow tent set up that brings in water and nutrients to the plants in grow tent. Place the plant pots on the floor of your gorilla grow tent. Inside the plant pots, you can use any appropriate growing medium. Connect a pipe to each plant pot. These pipes will play a role in supplying the water and nutrients to the plants inside the gorilla grow tent. Pass the pipes through appropriate opening on the grow tent.

#6. Drainage system installation

This is the most vital section of the gorilla grow tent set up. The drainage system helps to remove waste from the plants. On each pot, connect the poly pipe to the drainage hole. Using appropriate joints connect the drainage pipes to a centralized pipe that goes into the waste reservoir.

Conclusion

Setting up a gorilla grow tent is much easier than any other grow tent on the market. Fortunately, these tents come with easy-to-understand installation instructions. Moreover, you should note that the installation of grow tent takes only a few minutes.

for a list of Gorilla grow tents available for sale click here